26 November 2016, Saturday |
|
11:00 – 11:30 (Invited) |
“Rubber technologies for clean and safe environment” Avraam I. Isayev |
11:30 – 11:50 |
“Effect of various accelerators on crosslink structure and aging characteristics of NR/CR vulcanizates” Farzad A. Nobari Azar, Arta Babapour, Elif Kaymazlar, Murat Şen |
11:50 – 12:10 |
“Evaluating EPDM for dynamic applications” Ayşe Tuğba Bayram, Bağdagül Karaağaç, Haluk Konyalı |
12:10 – 12:30 |
“New HNBR compounds to meet stringent requirements in view of high temperature and media resistance” Ulrich Frenzel, Andreas Kaiser, Susanna Lieber, Sarah David, Adnan Gül |
12:30 – 13:30 |
LUNCH |
13:30 – 14:30 |
PANEL - University-Industry Cooperation |
14:30-14:50 |
KAHVE MOLASI |
14:50 – 15:10 |
“Effect of stearic acid on electrical properties of CB/SR based rubber compounds” Satılmış Basan, Betül Işık, Betül Özdin |
15:10 – 15:30 |
“Optimum active ZnO determination in EPDM formulations by using experimental design method (DoE)” Yusuf Güner, Ersen Uyar |
15:30 – 15:50 |
“Effect of POSS incorporation on Silicon/POSS nanocomposite properties and thier vulcanization kinetics” Hümeyra Şirin, Mehmet Kodal, İlhan Karaağaç, Bağdagül Karaağaç, Güralp Özkoç |
15:50-16:10 |
KAHVE MOLASI |
16:10 – 16:40 |
“Vulcanization kinetics of NR/ENR based rubber compounds reinforced with chopped and sized carbon fiber” Bedriye Nur Yeşil, Bağdagül Karaağaç |
16:40 – 17:00 |
“Industrial grade rubber synthesis from Dandelion” Erdem Mutlu |
17:00 - 17:20 |
“Current environmental regulations for rubber industry” Zeynep Tülin Yılmaz |
17:20-17:30 |
Closing Ceremony |
POSTER PRESENTATIONS
P1: “Preparing silicon elastomers by using electrically conductive EC-300J carbon black:
Investigation of crosslink density and relaxation behavior”
Arta Babapour, Farzad A. Nobari Azar, Elif Kaymazlar, Murat Şen
P2: “Effects of peroxide type and ratio on cure kinetics and mechanical properties of heat
stabilizer containing silicon elastomers”
Muharrem Parlak, Farzad A. Nobari Azar, Elif Kaymazlar, Murat Şen
P3: “Miscibility of EPDM/PEVA blends”
Gözde Ateş, Bağdagül Karaağaç
P4: “Microwave induced devulcanization of EPDM based wastes in the presence of bitumen”
Serkan Akpınar, Bağdagül Karaağaç
P5: “Mechanical, morphplogical and thermal properties of octamaleamic acid POSS/Natural
rubber composites”
Burak Kılıç, Mehmet Kodal, Bağdagül Karaağaç, Güralp Özkoç
P6: “Sound and radiation shielding material design with rubber-wood shavings- α-sepiolite-
sodium pentaborate compounds”
Macid Nurbaş, Filiz Balkaya, Zübeyde Kıvrak, Hamed Ghorbanpoor
P7: “Preparing Graphene/Natural rubber nanocomposites”
Yasin Altın, Ayşe Bedeloğlu
P8: “Shape memory properties of plasticized PLA/TPU blends”
Seyhan Boyacıoğlu, Güralp Özkoç
P9: “Preparation of the silicalite loaded poly(urethane) membrane and using for VOC removal from water”
Filiz Uğur Nigiz, Nilüfer Durmaz Hilmioğlu